Removing The Thermal Switch; Assembly - Canon NP7160 Service Manual

7) Free the harness from the harness retainer
[9].
8) Remove the two mounting screws [10],
and detach the heater support plate (rear)
[11].
9) Free the harness from the harness guide
[12], and detach the fixing heater [13].
Caution:
1.Do not start work if the surface of
the fixing heater is hot.
2.Do not touch the surface of the
fixing heater.
3.If the surface of the fixing heater is
soiled, dry wipe it.

5. Removing the Thermal Switch

Assembly

1) Remove the fixing assembly. (See p. 6-8.)
2) Disconnect the two connectors [1].
COPYRIGHT © 1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
[11]
Figure 6-210
[12]
Figure 6-211
[1]
Figure 6-212
[10]
[9]
[10]
[13]
6–11