Relocating The Machine - Canon NP7160 Service Manual

CHAPTER 8 INSTALLATION
III. RELOCATING THE MACHINE
If you need to relocate the machine by truck or any other means of transportation, perform
the following:
Step
1 Make a copy in Direct.
2 Take out all copy paper from the
cassette.
3 Excute '403' in service mode.
The scanner, lens, and No.4/No.5
mirror unit move to the position for
transportation.
4 Turn off the power switch, and
disconnect the power plug from the
power outlet.
5 Secure the scanner in place using the
two scanner fixing screws from the
left side of the copier.
6 Take out the drum unit, and mount the
dummy drum.
7 Remove the copy tray.
8 Tape the front door, multifeeder tray,
and cassette in place.
9 Place A3 copy paper on the
copyboard glass, and tape the
copyboard in place.
8–12
COPYRIGHT © 1998 CANON INC.
Work
CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
Checks
The drum unit must be
transported separately.
Remarks
Use the screws
removed during
installation work.