Lamp Regulator Pcb; Removing The Lamp Regulator Pcb - Canon NP7160 Service Manual

J. Lamp Regulator PCB

1. Removing the Lamp Regulator PCB

1) Remove the rear cover.
2) Disconnect the two connectors [1] of the

lamp regulator PCB.

3) Remove the three locking supports [2],
and detach the lamp regulator PCB [3].
COPYRIGHT © 1998 CANON INC.
CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS
CANON NP7160/NP7161 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[3]
Figure 7-327
[1]
7–21