Canon NP7160 Service Manual page 139

4) Remove the roller cover [3].
5) Remove the two bushings [4], and remove
the two springs [5].
6) While pushing the claw [A] with a flat-
blade screwdriver, remove the separation
roller [6].
7. Mounting the Separation Roller
Mount the separation roller by reversing
the steps used to remove it and with the
following in mind:
• When mounting the separation roller, be
sure to fit the pin [1] in the groove [2]
of the holder.
• When mounting the roller cover, be sure
so that the roller cover will push against
the bushing.
COPYRIGHT © 1998 CANON INC. CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
[3]
Figure 5-609
[5]
Figure 5-610
Figure 5-611
[1]
[2]
Figure 5-612
[4]
[6]
[A]
5–19