Cassette Assembly; Removing The Cassette Size Switch - Canon NP7160 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
D. Cassette Assembly

1. Removing the Cassette Size Switch

1) Remove the cassette.
2) Remove the delivery lower cover. (See
p.7-11)
3) Disconnect the connector [1] (J110) of the
DC controller PCB, and remove the
mounting screw [2] ; then, free the
harness from the harness guide.
4) Remove the mounting screw [3], and
remove the stopper [4].
5) Remove the cassette switch assembly [5].
6) Remove the hook [6], and remove the
cassette size switch [7].
Caution:
When mounting the cassette size
switch assembly, check to make sure
that the cassette size switch assembly
slides normally by the work of the
spring [8] pressure.
5–24
COPYRIGHT © 1998 CANON INC.
[4]
[3]
[7]
[8]
CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
Figure 5-624
[5]
Figure 5-625
[6]
Figure 5-626