Capacitor Pcb; Removing The Capacitor Pcb; Interlock Switch; Removing The Interlock Switch - Canon LASER CLASS 810 Service Manual

[3]
7) Remove the SEND PCB [1].
- Screw [2] 1pc.

10.4.16 Capacitor PCB

10.4.16.1 Removing the capacitor PCB

1) Remove the rear cover.
2) Remove the capacitor PCB cover [1].
- Screw [2] 1pc.
[1]
[2]
3) Remove the capacitor PCB [1].
- Connector [2] 1pc.
- Screw [3] 1pc.
[2] [1]
F-10-48
[1]
F-10-49
F-10-50
[3]

10.4.17 Interlock Switch

10.4.17.1 Removing the Interlock Switch

1) Remove the rear cover and front cover.
2) Remove the right cover and tray lower cover.
3) Remove the control panel and delivery tray.
4) Disconnect the connector (J112) from the DC controller PCB, and then re-
move the cable from the cable guide by cutting cable ties.
5) Remove the interlock switch [1].
- Claw [2] 1pc.
[2]
0017-7045

10.4.18 Fan

10.4.18.1 Removing the Heat Discharge Fan

1) Remove the rear cover, left middle cover, and left rear cover.
2) Remove the heat discharge fan [1].
- Connector [2] 1pc.
- Claw [3] 2pcs.
[1] [2]
[3]
F-10-51
[1] [2]
F-10-52
Chapter 10
0017-5549
0017-5550
10-17