Table of Contents
Advertisement
VMware daemon installation
Make sure both the run-time and development libusb libraries are installed on
your VMware system. Execute the following rpm query command to check that
the libraries are installed and the version numbers:
rpm -qa | grep libusb
The command returns the following two libusb entries (if your version numbers
are different, that is okay):
libusb-0.1.6-3
libusb-devel-0.1.6-3
If the command does not return these two libusb entries, install them. Both libusb
RPMs are in the /VMware/RPMS/ subdirectory on your VMware CD.
To install RSA II on VMware:
1. Download or copy the following RSA II daemon package to the VMware
server (xx is the version number of the RSA II package):
ibm_svc_rsa2_hlp2xxa_linux_32-64.tgz
2. Expand the .tgz file by using the following command:
tar xzvf ibm_svc_rsa2_hlp2xxa_linux_32-64.tgz
(Expanding the file creates an SRPMS directory.)
3. Change directory to SRPMS:
cd SRPMS
4. Install the 32-bit source RPM Package by issuing an rpm command, changing
directories, and issuing a second rpm command (xx is the version number of
the RSA II package):
rpmbuild --rebuild ibmusbasm-1.xx-2.src.rpm
cd /usr/src/redhat/RPMS/i386
rpm -ivh ibmusbasm-1.xx-2.i386.rpm
The RSA II daemon is ready to use.
6.2.7 TCP/UDP ports used by the RSA II
The RSA II uses several TCP/UDP ports for communication. If the
communication with the RSA II passes through firewalls, it is important to know
which ports you have, so you can enable the firewalls and be able to
communicate with the RSA. Table 6-3 on page 333 lists the default ports.
Remember when you change the ports in the RSA you have to change them in
the firewalls too.
332
Planning, Installing, and Managing the IBM System x3950 M2
Advertisement
Table of Contents
