IBM 88743BU - System x3950 E User Manual page 310

6. The Windows Server 2008 installer should detect the logical disks configured
through the ServeRAID MR10k or onboard LSI 1078 integrated RAID
controllers.
If you are installing on remote storage (for example SAN LUN), you might
have to click Load Driver and select the appropriate storage host bus adapter
driver from diskette drive A:
Figure 5-37 Selecting the disk on which to install Windows Server 2008
7. Continue with the installation process until completed.
8. After Windows Server 2008 boots from the disk partition you selected during
the installation process, log on as Administrator and follow the instructions
listed in the next section to install additional updated devices drivers for any
other devices you might have installed in the x3850 M2 or x3950 M2 (single
and multinode).
292
Planning, Installing, and Managing the IBM System x3950 M2