Table of Contents
Advertisement
Figure 4-35 RSA II Web interface: power-off state
Solution and workaround
A newer BMC firmware solves the incorrect reading of the power state that is
reported by the field programmable gate array (FPGA) firmware code.
You can work around this error by removing all systems in the partitions from the
AC power source. Wait 30 seconds and then replug the AC power.
We recommend that you regularly check for newer system firmware code and
updated product publications such as the Problem Determination and Support
Guide and new tips on the Support for IBM System Support Web pages at:
http://www.ibm.com/systems/support/x
As shown in Figure 4-36 on page 244, select your product family x3850 M2 or
x3950 M2, or the machine type to find the required information.
Power:
Off
State:
System power off/State unknown
Restart count:
137
Power-on hours:
465 hours
Chapter 4. Multinode hardware configurations
243
Advertisement
Table of Contents
