Table of Contents
Advertisement
According the PCIe bus scan order (see 3.5, "PCI Express options" on page 188
for details), adapter number 0 is installed in the primary node, and adapter
number 1 in the secondary node.
To choose the adapter you want to configure, use either the mouse or keyboard
(Tab key) to select the adapter, and then click Start or press Enter to begin the
process. The WebBIOS main window opens.
Note: If a mouse is not available, you can always operate with the Tab key to
switch between options and buttons and spacebar or Enter to select any.
WebBIOS main window
The WebBIOS has been started. As shown in Figure 3-52, the window is
separated into three areas: the Controller Function menu, Physical Drives panel,
and Virtual Drives panel.
Figure 3-52 WebBIOS main window
The window also includes icons, as shown in Figure 3-53 on page 161.
160
Planning, Installing, and Managing the IBM System x3950 M2
Advertisement
Table of Contents
