Table of Contents
Advertisement
Adapter Properties option
To get the details for this adapter, select the Adapter Properties option, shown
in Figure 3-54 on page 161. This provides information about the adapter you
selected in the Adapter Selection menu (Figure 3-51 on page 159).
The first page, in Figure 3-55, shows the physical specification of the adapter and
version for BIOS, firmware package, and summarized information for physical
and defined virtual drives.
Figure 3-55 Adapter properties (page 1): physical specifications
Note: If a background initialization is in progress, you may click Background
Init Progress to determine its state of completion.
Click Next to view the second page of the Adapter Properties window, shown in
Figure 3-56 on page 163. On the second page, click Next again to view the third
page, shown in Figure 3-57 on page 163. You may change any of the default
settings of the ServeRAID adapter properties.
Note: The second page allows you to change the Rebuild Rate, which can
negatively affect the performance of the SAS subsystem such as by
performance degradation within the operating system and its applications.
162
Planning, Installing, and Managing the IBM System x3950 M2
Advertisement
Table of Contents
