Table of Contents
Advertisement
Please enter a command. (Type 'help' for commands)
>update_
Node count: 2
Flashing node: 0
Waiting for device to become available:
.usb 9-6: new high speed USB device using ehci_hcd and address 4
usb 9-6: new device found, idVendor=0483, idProduct=fada
usb 9-6: new device strings: Mfr=2, Product=1, SerialNumber=0
usb 9-6: Product: ST72682 High Speed Mode
usb 9-6: Manufacturer: STMicroelectronics
usb 9-6: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
..... Vendor: ST
Model: ST72682
Rev: 2.10
Type:
Direct-Access
ANSI SCSI revision: 02
SCSI device sda: 1024000 512-byte hdwr sectors (524 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 1024000 512-byte hdwr sectors (524 MB)
.sda: Write Protect is off
sda: assuming drive cache: write through
sda: sda1
sd 1:0:0:0: Attached scsi removable disk sda
sd 1:0:0:0: Attached scsi generic sg1 type 0
Device flashing in progress:
.........................................................................
.........................................................................
.........................................................................
Flashing node: 1
Waiting for device to become available:
.sda : READ CAPACITY failed.
sda : status=0, message=00, host=7, driver=00
sda : sense not available.
sda : Write Protect is off
sda : assuming drive cache: write through
sda : READ CAPACITY failed.
sda : status=0, message=00, host=7, driver=00
sda : sense not available.
usb 10-6: new high speed USB device using ehci_hcd and address 4
sda : Write Protect is off
sda : assuming drive cache: write through
INQUIRY host_status=0x7
sda : READ CAPACITY failed.
sda : status=0, message=00, host=7, driver=00
sda : sense not available.
sda : Write Protect is off
sda : assuming drive cache: write through
sda : READ CAPACITY failed.
252
Planning, Installing, and Managing the IBM System x3950 M2
Advertisement
Table of Contents
