Table of Contents
Advertisement
Figure 4-28 x3950 M2: Light Path Diagnostics panel with blue REMIND button
After the boxes merged successful you can see the following information
about the window on the different boxes:
– Primary server display, shown in Example 4-3.
Example 4-3 x3950 M2: merging process successful, Primary server
Chassis Number
Partition merge successful
64 GB Memory: Installed
512 MB Memory: Consumed by Scalability
Press ESC to reboot and bypass merge attempt on next boot
Press F1 for Setup
Press F2 for Preboot Diagnostics (DSA)
Press F12 to select boot devices
– Secondary server display, shown in Example 4-4.
Example 4-4 x3950 M2: merging process successful, Secondary server
Merge complete - see primary server display
The white scalability LED on the front of all nodes, which merged successfully
to this partition, becomes solid
this partition is swapped to the Standalone mode, followed by a reboot.
230
Planning, Installing, and Managing the IBM System x3950 M2
Partition Merge Status
1
Primary
2
Merged
on
. This LED goes
Blue REMIND button
Installed Memory
32GB
32GB
off
again after a system in
Advertisement
Table of Contents
