IBM 88743BU - System x3950 E User Manual page 348

4. When the installation finishes, you may delete the files in the temporary folder.
To determine if the installation was successful, check the services for the IBM
Remote Supervisor Adapter II by selecting Start → All Programs →
Administrative Tools → Services. Scroll to the service IBM RSAII and verify
that the Status indicates Started (Figure 6-23).
Figure 6-23 RSA II service in Windows operating system
Note: If you have not already done so, change the setting OS USB Selection
to Other OS in the system BIOS, as shown in Figure 6-14 on page 320.
Linux daemon installation
To install the RSA II device driver (daemon) on Linux, ensure that you
downloaded the correct RPM for your Linux distribution. Available packages at
the time of writing this book are:
Red Hat Enterprise Linux 3
Red Hat Enterprise Linux 4
Red Hat Enterprise Linux 5
SUSE Linux Enterprise Server 9
SUSE Linux Enterprise Server 10
VMware ESX Server 3
VMware ESX 3i version 3.5 (embedded or installed)
VMware ESX 3.5
330
Planning, Installing, and Managing the IBM System x3950 M2