Table of Contents
Advertisement
French 105-key keyboard
German 105-key keyboard
Italian 105-key keyboard
Japanese 109-key keyboard
Spanish 105-key keyboard
UK 105-key keyboard
The Video Speed selector, shown in Figure 6-20 is used to limit the bandwidth
that is devoted to the Remote Console display on your computer. Reducing the
Video Speed can improve the rate at which the Remote Console display is
refreshed by limiting the video data that must be displayed.
Figure 6-20 RSA II Remote Control: Video Speed selector
You may reduce, or even stop, video data to allow more bandwidth for Remote
Disk. Move the slider left or right until you find the bandwidth that achieves the
best results. The changes do not require a restart of RSA II or the server.
6.2.5 Updating firmware
Flash the RSA II card if it is not at the latest level of firmware to ensure that all
known fixes are implemented. As described in the 4.4, "Prerequisites to create a
multinode complex" on page 201, having a specific firmware level on the card is
important.
Check the installed firmware in the RSA II Web interface. Select the task
Monitors → Vital Product Data and scroll down to ASM VPD, as shown in
Figure 6-21.
Figure 6-21 RSA II firmware level
Chapter 6. Management
327
Advertisement
Table of Contents
