Programming; Using Recall On A System Telephone; Using Recall On A Single-Line Telephone - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
You can press
it is the first character in the stored number.
Recall is ignored on T1 lines.

Programming

To program a Recall button:
f00
1. Press
2. Press a programmable button.
f03
3. Press
4. Program another button for this extension, or exit programming mode.

Using Recall on a System Telephone

To access a PBX, central office, or Centrex feature (such as Call Waiting) while active on an
outside line:
1. Press the programmed button or
2. Enter the access code for the feature (if required).
3. To return to your original call, press the programmed button or

Using Recall on a Single-Line Telephone

To access a PBX, central office, or Centrex feature (such as Call Waiting) while active on an
outside line:
1. Press the switchhook (or press the Recall or Flash button on a feature telephone that has
one).
You hear intercom dial tone.
#03
2. Press
3. Enter the access code for the feature (if required).
4. To return to your original call, press the switchhook (or press the Recall or Flash button on a
feature telephone) again.
Recall (F03)
8-54
S
to insert a Recall signal in an Auto Dial or Speed Dial number, provided
.
.
f03
.
8
8
.
f03
8
again.