Caller Id Name Display (F16) - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
3. The button you press to dial the call depends on the number of digits you must dial to
complete the call from your area:
To dial the complete number including the 1, press the button under the 1 (left button).
To include the area code but not the 1, press the button under the area code (the second
button).
To dial the seven-digit number only, press the button under the seven-digit telephone
number displayed (the third button).
You also have the following options at the Call Log Dial display:
Press the Back button to return to the Telephone Number or Name Display.
Press the Call Log Display button to exit the Call Log.
The green light goes off when the feature is deactivated.

Caller ID Name Display (F16)

Use this feature to toggle the display between Caller ID number and Caller ID name. Caller ID
name is an optional feature of the Caller ID service provided by your local telephone company and
may not be available in your area (even if Caller ID number is available).
Considerations
Program this feature on a button with lights on a system display telephone. When Caller ID
Name Display is on, the green light is on, indicating that the Caller ID name will be displayed
rather than the Caller ID number.
SMDR reports print only Caller ID number (where available). (If a number is not available, it is
reported as "IN" on the call report.)
Caller ID Name Display has no effect on Call Coverage calls. Coverage calls always display
the extension number of the user who is sending calls for coverage.
You can use this feature while using Call Screening (F25).
While a TransTalk telephone is ringing, you can use Caller ID Name Display to pre-select
Caller ID name or Caller ID number to appear on the display.
Caller ID information is unavailable on T1 lines.
Programming
To program a Caller ID Name Display button:
f00
1. Press
2. Press a programmable button with lights.
f16
3. Press
4. Program another button for this extension, or exit programming mode.
Using Caller ID Name Display
Press the programmed button to turn Caller ID Name Display on; press it again to turn it off.
Caller ID Features
8-26
.
.
8
8
8
8