Touch-Tone Enable (F08); Considerations; Programming; Using Touch-Tone Enable - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use

Touch-Tone Enable (F08)

Use this feature to send touch-tone signals on an outside call over a rotary line. For example, you
may need to dial touch-tone digits while on a call to a bank-by-telephone service. You can use
Touch-Tone Enable only from a system telephone.

Considerations

Touch-Tone Enable is needed only when dialing on a rotary line.
Use Touch-Tone Enable only after a call is connected. For example, use this feature after
dialing a bank-by-telephone service that requires you to dial touch-tone digits.
You can program a Touch-Tone Enable button on a system telephone to turn on Touch-Tone
Enable with one touch.
You cannot use Touch-Tone Enable with Call Screening (F25).
To activate this feature from within a number stored on an Auto Dial button or as part of a
Speed Dial number, press

Programming

To program a Touch-Tone Enable button:
f00
1. Press
2. Press a programmable button.
f08
3. Press
4. Program another button for this extension, or exit programming mode.

Using Touch-Tone Enable

From a system telephone, press the programmed button or press
enter touch-tone digits. Touch-Tone Enable stays in effect until you hang up.

Touch-Tone Enable (F08)

8-70
&
when storing the number.
.
.
8
8
8
8
f08
when you need to