Avaya PARTNER Advanced Communications System Installation And Use Manual page 356

Advanced communications system
Hide thumbs Also See for PARTNER Advanced Communications System:
Table of Contents

Advertisement

®
PARTNER
Advanced Communications System Installation, Programming, and Use
SMDR Record Type (#608)
Use this feature to specify whether all calls or outgoing calls only are to be included on call reports.
Considerations
The date and time that appear on call reports are determined by System Date (#101) and
System Time (#103).
The call report page header prints in the Display Language (#303) specified for extension 10.
If Account Code Entry (optional or forced) is used to enter an account code for a call, the
account code prints on the call report. If there are entries in the Forced Account Code List
(#409), only valid account codes and any other entered digits up to 16 print on the call report.
Marked System Speed Dial numbers appear on the call report as F nnn, where nnn is the
Speed Dial code.
If you use Caller ID, SMDR reports include the telephone numbers of incoming calls.
Call records for incoming calls on T1 lines with Direct Inward Dialing (DID) are reported only
if SMDR Record Type (#608) is set to 1=All Calls.
Programming
To identify the type of calls to include for call reporting:
f00ss#608
1. Press
D
2. Press
1 = All Calls (outgoing and incoming; the factory setting) 
2 = Outgoing Only
3. Select another procedure, or exit programming mode.
SMDR Top of Page (#609)
Use this feature to notify the system that the printer has been aligned to the top of a new page.
Use this feature after inserting paper, clearing a jam, or to print a new header after changing
SMDR Output Format or SMDR Talk Time. When this feature is used, the system prints a new
call report header.
Considerations
This procedure is skipped in the sequence of programming procedures when cycling. To use
this procedure, enter the code directly.
You can use Display Language (#303) to specify the language in which the call report page
header should print.
Station Message Detail Recording (SMDR)
9-40
until the appropriate value appears:
9
at extension 10 or 11.
9
9
9
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Partner acs

Table of Contents