Using Wake Up Service - Avaya PARTNER Advanced Communications System Installation And Use Manual

®
PARTNER Advanced Communications System Installation, Programming, and Use
If you want to assign Wake Up Service to a specific button, press
the following appears:
Wake Up Service Button
3 Select a Button
Then press a programmable button with lights to assign Wake Up Service to that button.
3. Select another procedure, or exit programming mode.
4. Label the Wake Up Service Button at extension 10.

Using Wake Up Service

To schedule a wake up call for a specific extension:
1. Press the Wake Up Service Button at extension 10.
The green light next to the Wake Up Service Button flutters. Wake Up Service is activated.
2. Dial the two-digit extension number of the desired extension (or use an Auto Dial button).
3. Enter the wake-up time in 24-hour notation. For example, to set the time to 2:15 p.m., press
1415
. When you have finished entering the time, the display reads:
Wake Up Call 32 14:15
The wake up call is scheduled, and the green light next to the Wake Up Service Button turns
off.
To review a scheduled wake up time for a specific extension:
1. Press the Wake Up Service Button at extension 10.
2. Dial the two-digit target extension number (or use an Auto Dial button).
3. Review the displayed wake up time and target extension number.
4. Press the Wake Up Service Button to exit.
5. Repeat Steps 1 through 4 to review wake up times for other extensions.
To cancel a scheduled wake up call:
1. Press the Wake Up Service Button at extension 10.
2. Dial the two-digit target extension number (or use an Auto Dial button).
#
3. Press .
4. Repeat Steps 1–3 to cancel a scheduled wake-up call for another extension.
Wake Up Service Button (#115)
7-22
3
. A display similar to
7