AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual page 45

UnixWare Installation
New Installations
Installation Before you begin the installation, review the following guidelines:
guidelines
Procedure To start the installation process:
Installation During the installation, your screen prompts you for information
prompts about your system's configuration. In general, use the UnixWare
defaults. However, some of the prompts require information
specific to the Proxy Agent.
The following table provides this information:
We recommend that you complete the installation
checklists in your UnixWare installation handbook before
you begin the installation.
Use the installation defaults as much as possible.
Step Action
1 Insert the installation diskette and the CD for UnixWare.
2 Reboot your computer.
Result: First the startup screen displays. Then the
welcome screen displays.
3 Follow the screen prompts.
Hint: If you need help, see the UnixWare installation
handbook for release 2.01 .
Issue 2 April 1996
End
3-5