To Edit The Devices File - AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual

Connectivity

To Edit the Devices File

To Edit the Devices File

When to use
Edit the Devices file only after you have updated the abbreviated
dialing list.
Procedure
Use the following steps to edit the Devices file.
Step
1
2
3
4
5
6
7
6-28 Issue 2 April 1996
Action
If necessary, enter the following command to change
to the uucp directory
cd /etc/uucp
Use a UNIX editor to open the Devices file.
Example: vi Devices
Delete the ACU (Automatic Calling Unit) entry for the
device you are adding.
Example: /dev/ttyxxx
Add the following line at the end of the file:
Direct /dev/ttyxxx - g9600 hotline
xxx = the name of the tty device
Repeat step 4 for each additional PBX.
Write and quit the file.
Do you want to set up a hotline connection?
If yes, go to To Set Up a Hotline Connection.
If no, go to To Administer the Proxy Agent.
: