AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual page 215

Alarms
Program the Alarm Receiver Port
Procedure 4: Enter the Port Services data exactly as shown on page 1 of the
Enter port following screen.
services
data, page 1
Add Port Services to Port Monitor alrmrcvr
Service tag: tty00
Identification & authentication scheme: login
Service invocation identity:
Port/service state: DISABLED
utmp entry to be created for this service? Yes
Version number: 2
File name of the port service configuration script:
Comments: Alarm receiver port-must be disabled
If your serial port is not tty00, substitute the port's name for the
entry in the Service tag field. Leave the two optional fields in this
example blank.
When you finish, complete the following steps:
Step Action
1 Press to save your work.
F3
2 Go to Procedure 5: Enter port services data, page 2.
Page 1 of 2
Issue 2 April 1996
10-7