AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual page 128

Connectivity
To Program PBX Ports
Procedure 4: Use the following steps to program the following:
Data-only
data module
and ADU
You may have to use modem pooling.
Step
1
2
3
4
See also
For more details, refer to the DEFINITY G3 product
documentation. For a complete list of DEFINITY documents, see
Related Resources in the About This Book.
6-14 Issue 2 April 1996
A stand-alone 7400B data module that only carries data
An ADU
Action
Enter the following command:
add data-module
Enter the following in the Type field:
For a data module, enter pdm
For an ADU, enter data-line
Set the baud rate of the PBX or the AUDIX system to
match the baud rate of Proxy Agent.
For the ADU, set the Auto Adjust field to n.
End