To Verify Dial Strings - AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual

Serial I/O Cards

To Verify Dial Strings

To Verify Dial Strings
When to use
Use the information in this section whenever you need to verify
that the Dialers file contains an entry for the type of
communication device you are installing.
Types of The following table lists the types of AT&T certified communication
communica-
devices that you can use.
tion devices
Certified modems*
3830 ComSphere
Paradyne 3715
* Any devices that are connected to the 3715 modem must
specify the hayes device type in the Devices file.
Example: ACU ttysak - g1200 hayes
Dial strings The following dial string is associated with modems connected to
for modems the serial ports card:
hayes =,-, ""
\M\dAT&FE1V1X4Q0&C1&D2S7=255S0=0\r\c OK
\EATDT\T\r\c CONNECT \m
The entire dial string is on one line in the Dialers file.
7-16 Issue 2 April 1996
Certified data modules
Z3A1 Asynchronous Data Unit (ADU)
AT&T 7400B
Processor data module (PDM)