AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual page 152

Serial I/O Cards
DigiBoard Xem
Procedure 1: Start at the UNIX prompt.
Install the
device driver
Step
1
2
3
4
5
Procedure 2: Start at the UNIX root prompt.
Configure
the device
driver
Step
1
2
7-4 Issue 2 April 1996
Action
Log in as root.
Insert the installation diskette.
Enter the following command:
pkgadd -d diskette1
Follow the screen prompts until the installation is
complete.
Go to Procedure 2: Configure the device driver.
Action
Enter the following command:
mpi
Result: A welcome window displays.
Navigate through the screens until the Board
Configuration window displays.