Serial I/O Cards
To Create Port Monitor Entries
Procedure 5:
The following Ad d Port Services to Port Monitor for ttymon screen
Enter port
shows your field entries for page 2.
services
data, page 2
Add Port Services to Port Monitor remote
Name of TTY device: /dev/tty00
ttylabel: 9600
Service command: /usr/bin/shserv
TTY line options:
Hangup: Yes
Bidirectiona1: No
Timeout: 0
Prompt message: login
(Optional fields)
Modules to be pushed: ldterm
If your serial port is not tty00, substitute the port's name for the
entry in the Name of TTY device field. When you finish, complete
the following steps.
Connect-on-carrier: No
Wait-Read: Yes
Step
Action
1
Press
to save your work.
F3
2
Press
to access the Command menu.
F7
3
Select exit to return to the shell prompt.
Page 2 of 2
End
Issue 2 April 1996
7-23