AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual page 167

Serial I/O Cards
To Create Port Monitor Entries
Procedure 2: Enter the port data exactly as shown on the following Ad d A Port
Enter port Monitor screen:
data
Step Action
1 Log in as root.
2 Enter the following command:
sysadm ports
Result: The Service Access Management menu
displays.
3 Select port_monitors.
Result: The Port Monitor Management menu displays.
4 Select add.
Result: The Add a Port Monitor screen displays.
5 Go to Procedure 2: Enter port data.
Issue 2 April 1996
7-19