To Change The User Interface - AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual

Proxy Agent Administration

To Change the User Interface

To Change the User
Interface
Introduction The Change User-Interface screen lets you:
When to use Typically, you use this screen only when you set up the Proxy
Agent for the first time. Even then, changing the default values is
more a matter of preference than necessity.
Alternate
You can access the user-interface fields from the console when
access log ged in as the Proxy Agent system administrator (g3maadm).
User The Change User-Interface screen displays two Configurations
interface Options fields that allow you to set the user-interface options. The
options
following table describes these fields.
Change screen colors (if your PC, system console, or
terminal has color capacity)
Specify if you want a beep tone for operational errors
Issue 2 April 1996
9-13