To Assign Devices To The Proxy Agent - AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual

Serial I/O Cards

To Assign Devices to the Proxy Agent

To Assign Devices to the
Proxy Agent
Introduction You must establish a connection between at least one device and
the Proxy Agent. If you do not, all Proxy Agent connections will fail.
You establish this connection by assigning the device to the Proxy
Agent.
When to use Use the information in this section whenever you want to establish
a connection between a device and the Proxy Agent.
The devices you are assigning for Proxy Agent connectivity are
Definition
modems and data modules. Once you designate a device for use
by the Proxy Agent, other software packages cannot use the
device for connectivity.
File to edit Edit the /etc/uucp/Devices file to establish connections between
your Proxy Agent and G3 PBXs.
Procedure Use the following procedure to edit the Devices file.
Issue 2 April 1996
7-13