AT&T OneVision DEFINITY G3 Guide Installation And Connection Manual page 216

Alarms
Program the Alarm Receiver Port
Procedure 5: The following Ad d Port Services to Port Monitor alrmrcvr screen
Enter port shows your field entries for page 2:
services
data, page 2
Add Port Services to Port Monitor alrmrcvr
Name of TTY device: /dev/tty00
ttylabel: 1200
Service command: /usr/bin/shserv
TTY line options:
Hangup: Yes
Bidirectiona1: Yes
Timeout: O
Prompt message: login
(Optional fields)
Modules to be pushed: ldterm
If your serial port is not tty00, substitute the port's name for the
entry in the Name of TTY device field. When you finish, complete
the following steps.
Step
1
2
3
10-8 Issue 2 April 1996
Connect-on-carrier: No
Wait-Read: Yes
Action
Press to save your work.
F3
Press to access the Command menu.
F7
Select exit to return to the shell prompt.
Page 2 of 2
End