Lucent Technologies MERLIN LEGEND Release 5.0 Pocket Reference page 146

Technician's Addendum
Remote Modem Connection (continued)
4. If your system does not have the Remote Access feature activated, do
the following:
a. Place a voice call to the system on the line to which the modem is
connected by using the main telephone number.
b. Have the operator transfer you to the modem (by pressing Transfer,
dialing *10, and hanging up the telephone).
c. To put the modem on line, type ATH1 or ATH1O, depending on the
type of modem. (In ATH1O, the last "digit" is the alphabet letter "O,"
not zero.)
d. Press ENTER, and hang up the telephone.
5. Type the SPM password to display the SPM Main Menu.
142