AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 65

U s i n g F e a t u r e s
To Program Auto Dial Buttons
1. Label button to be programmed with name or other identifier.
2. Slide T/P switch to P.
3. Press button you labeled.
4. Dial *21 for outside numbers, or *22 for inside numbers. See
Notes.
5. Dial extension or phone number (including dial-out code,
long-distance access code, area code, and any special
characters). See Notes.
6. Slide T/P switch to center.
Notes:
Account codes, access codes, and outside phone
numbers can be programmed as outside Auto Dial
buttons.
Special characters may be needed when programming an
outside Auto Dial button. For more on special characters,
see Appendix A.
4-12 A u t o D i a l