AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 86

Using Features
To Program a Park Button
1. Label button to be programmed as Park.
2. Slide T/P switch to P.
Press button you labeled Park.
3.
4. Dial *86.
5. Slide T/P switch to center.
To Program a Park Button for a Specific Park Zone
1. Label line button to be programmed as Park-(zone).
2. Slide T/P switch to P.
Press button you labeled Park-(zone).
3.
4. Dial *22 and Park zone extension.
5. Slide T/P switch to center.
To Use Park and Paging
1. Park the call.
To park the call at your extension:
Press programmed Park button, or press Transfer, dial your
extension, and press Transfer again.
To park the call at a Park zone:
Press programmed Park-(zone) button, or press Transfer, dial
Park zone extension, and press Transfer again.
2. Set up page.
For Speakerphone Page, press programmed
Group Page-(name) or Page All button, or dial Group Page
or Page All number.
For Loudspeaker Page, press Loudspeaker Page button, or
press Feature button, dial 9 and the line number (801-880)
and, if necessary, the code for the page zone.
3. Announce call and extension where call is parked.
P a r k 4 - 3 3