Camp-On - AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual

Using Features

Camp-On

Use Camp-On to transfer a call to a busy inside phone and
put the call on hold for a preset length of time (for example,
90 seconds).
The person you transferred the call to hears a tone, signaling
there's another call waiting. If the call remains unanswered, it
returns to you for further handling and you hear three rings.
You can use Camp-On with either a programmed line button
or a feature code.
To Program a Camp-On Button
1. Label button to be programmed as Camp-On.
2.
Slide T/P switch to P.
3. Press button you labeled Camp-On.
4. Dial *57.
5. Slide T/P switch to center.
To Use Camp-On with Manual Dial
1. Press Transfer and dial extension.
2. Press programmed Camp-On button or press programmed
Feature button and dial 57. See Note.
3. Hang up, press Speakerphone, or use headset.
Note: Press # if you don't have a programmed Feature
button.
C a m p - O n 4 - 1 5