AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 75

Using Features
If your DSS is set up with additional extensions (shifts) on
each DSS button, you must press the appropriate Shift button
to see the message status of these extensions.
You can also check message status if you have Auto Dial
buttons programmed with co-workers' extensions. If the red
light next to the Auto Dial button is on, the co-worker's
message light is on.
Must have DSS or Auto Dial button to check message
s t a t u s .
To Program a Send/Remove Message Button
1. Label button to be programmed as Send/Remove Message.
2. Slide T/P switch to P.
Press button you labeled Send/Remove Message.
3.
4. Dial *38.
5. Slide T/P switch to center.
4 - 2 2 M e s s a g i n g