AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 79

Using Features
To Program a Posted Message Button
1.
Label button to be programmed as Posted Message.
2. Slide T/P switch to P.
Press button you labeled Posted Message.
3.
4. Dial *751.
5. Slide the T/P switch to center.
To Post a Message
1. Press programmed Posted Message button.
Green light next to button flashes.
2. Dial code of message you want (01-20).
Green light next to the button stops flashing and remains on.
To Cancel a Posted Message
1. Press programmed Posted Message button.
Green light next to the button flashes.
2. Dial 00.
Green light next to the button goes off.
4 - 2 6 M e s s a g i n g