Line Button Lights - AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual

Rings
One ring
Two rings
Three rings

Line Button Lights

Red
Call Automatic connection
Red and green
Green
Alarm
Flash green
Fast flash green— Held call (yours)
Slow flash green
Message Status on DSS
Press Message Status button
(and Page button if needed)
Light
on Operator message
Light
off No operator message
DSS Button Lights
Off
On
Fast flash
Slow flash
Inside call
Outside call
Returning call
You're on line
Line or feature
in use
System problem
Incoming call
Held call
(co-worker's)
Phone free and
Do Not Disturb
not on
Phone in use or
Do Not Disturb on
Call for you
Returning
transfer
Inside Transfers with
One-Touch Transfer
One-Touch Transfer
With automatic completion,
press DSS or Auto Dial button
With manual completion, press
DSS or Auto Dial button,
announce call, and hang up
or press Spkrphone
If co-worker is unavailable
Consider Barge-In, Camp-On,
Paging, or Park
Use Send/Remove Message
Inside Transfers Without
One-Touch Transfer
1. Press Transfer
2. Dial extension, or press DSS
or Auto Dial
3. Hang up or press Spkrphone
If co-worker is unavailable
Consider Barge-In, Camp-On,
Paging, or Park
Use Send/Remove Message
Outside Transfers
1. Press Transfer
2. Press line or SA button
3. Dial dial-out code and number
4. Hang up or press Spkrphone