AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 20

Understanding Your Equipment
Dedicated Feature Buttons
Nine imprinted buttons for the
features used most often
Above the dialpad:
Conference for adding a line or
extension to a conference call
Transfer for sending a call to
another extension
Drop for disconnecting an
extension or line from a
conference call
Hold for putting a call on hold
Below the dialpad:
Recall for disconnecting from
one call to get a dial tone for
another call without hanging up
Message for indicating when a
message is waiting (light next
to button goes on)
HFAI (Hands Free Answer on
Intercom) for answering voice-
announced calls without the
handset
Mic (BIS-22D) and
Microphone (BIS-34 & -34D)
for turning the speakerphone
microphone on and off
Spkrphone (BIS-22D) and
Speakerphone (BIS-34 & -34D)
for talking on and listening to a
call without lifting the handset
Dialpad
The area on the console used to
dial phone numbers
Timekeeping Buttons
(BIS-22D & BIS-34D)
Four buttons used for displaying
timekeeping functions
Display Screen
(BIS-22D & BIS-34D)
The 1-line by 16-character display
that shows call information, date,
and time
Handset
The hand-held part of the console
that you pick up, talk into, and listen
from
Line Buttons
22 (BIS-22D) or 34 (BIS-34 and
BIS-34D) buttons used to make and
receive calls. Unlabeled buttons
can be programmed for one-step
feature use. Each button has two
lights next to it.
Ringing Volume Control
A sliding control used for adjusting
the ringer's volume
Speakerphone Volume Control
A control for adjusting the volume of
the speaker
T/P Switch
A sliding switch used for testing
and programming the phone
BIS-22D, BIS-34, BIS-34D 1 - 7