AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 83

Using Features
To Program Speakerphone Paging Buttons
1. Label button as Group Page-(name) or Page All.
2. Slide T/P switch to P.
Press button you labeled Group Page-(name) or Page All.
3.
4.
Dial *22 and Group Page-(name) or Page All extension.
5. Slide T/P switch to center.
To Use Speakerphone Paging
1. Press ICOM Ring or SA Ring button.
2. Lift handset or use headset. See Note.
3. Press programmed Group Page-(name) or Page All button or
dial Group Page-(name) or Page All extension.
4. Make announcement.
Notes:
Using the speakerphone can create a feedback tone.
Co-workers who are using their speakerphones do not
hear a Speakerphone Page.
To Use Loudspeaker Paging
1. Lift handset or use headset. See Notes.
2. Press Loudspeaker Page button, or press programmed Feature
button and dial 9 and line number (801-880). See Notes.
3. Dial code for zone to be paged.
4. Make announcement.
4 - 3 0 P a g i n g