AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 55

Using Features
To Program Features Onto Line Buttons
1. Remove clear label cover from console by inserting end of a
paper clip in notch at top of cover.
2. Write feature name next to button to be programmed.
Replace cover.
3.
4. Slide T/P switch to P.
Your phone rings repeatedly to signal you are in programming mode.
Press button you labeled.
5.
6. Dial programming code.
Some features require additional entries. For example, you must enter an
extension for inside Auto Dial.
7. Slide T/P switch to center.
Note: If you cannot program your console, someone may be
programming the system. See your system manager.
To Program a Feature Button
1. Label button you want to program as Feature.
2. Slide T/P switch to P.
3. Press button you labeled Feature.
4. Dial *20.
5. Return T/P switch to center.
To Use a Feature Code
1. Press programmed Feature button, or dial #.
2. Dial feature code.
4 - 2 U s i n g F e a t u r e s