Table of Contents
Advertisement
Using Features
Calendar
Set the current time, day, and date on your display so you can
record the time on messages.
Must have display console.
To Set the Time, Day, and Date on BIS-22D and
BIS-34D Consoles
Press Set until time, day, or date begins to flash on display.
1.
2.
Press Fwd or Rev to change item.
Repeat steps 1 and 2 to select and change another item.
3.
4.
Press Exit.
To Set the Time, Day, and Date on MERLIN II
System Display Consoles
Press Clock Functions button.
1.
2.
Select Set from display.
3.
Select Day from display.
4.
Press button below display until display shows current day.
5.
Select Time from display.
Press Hour and Min arrow keys. (Up arrow raises numbers;
6.
down arrow lowers numbers.)
7.
Select Date from display.
8.
Press Month and Date arrow keys. (Up arrow raises numbers,
down arrow lowers number.)
9.
Select Exit.
10.
Select Exit
11.
Press Clock
4 - 1 4
Calendar
again.
Functions button.
Advertisement
Table of Contents
Need help?
Do you have a question about the MERLIN LEGEND Analog Direct-Line Console and is the answer not in the manual?