AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 71

Using Features
To Program Extension Status Buttons
1. Label buttons to be programmed as
ES Off
ES1
ES2
2. Slide T/P switch to P.
3. Press one of the buttons to be programmed.
4. Dial:
*760 for ES Off
*761 for ES1
*762 for ES2
5. Repeat steps 3 and 4 to program remaining buttons.
6. Slide T/P switch to center.
Note: The labels suggested in step 1 apply to the Extension
Status feature used by businesses with housekeeping or
health care services. For information on labeling your console
for a calling group, see the Calling Group Supervisor's Guide.
To Change Extension Status from Your Console
1. Press programmed ES Off, ES1, or ES2 button, or press
programmed Feature button and dial 760 for ES Off, 761 for
ES1, or 762 for ES2. See Notes.
2. Press DSS or Auto Dial button for extension you want to change.
Notes:
You can change to ES Off only from a DLC that has been
programmed with this capability. Status cannot be changed
to ES Off from an extension, except in calling groups.
Press # if you don't have a programmed Feature button.
4-18 E x t e n s i o n S t a t u s