AT&T MERLIN LEGEND Analog Direct-Line Console Operator's Manual page 59

Using Features
To Program an Account Code Entry Button
1. Label button to be programmed as Account Code.
2. Slide T/P switch to P.
3. Press button you labeled Account Code.
4. Dial *82.
5. Slide T/P switch to center.
To Enter an Account Code Before a Call
1. Press programmed Account Code button, or press programmed
Feature button and dial 82. See Notes.
2. Dial account code followed by #. See Notes.
3. Press an SA or line button.
4. Lift handset, press Speakerphone, or use headset.
5. Dial phone number (including dial-out code if using an SA
button).
Notes:
For step 2, you can program an outside Auto Dial button
with a specific account code followed by a #. Press
the button whenever you need to enter the code. (See
"Auto Dial" later in this chapter).
If using account codes on a conference call, follow steps
1-5 and press Conference. When adding participants,
repeat steps 1, 2, 3, and 5 and press Conference again.
If you don't have a programmed Feature button, press #
instead.
4-6 A c c o u n t C o d e E n t r y