Group Page; Programming Group Page Buttons - AT&T MERLIN 3070 Attendant's Manual

GROUP PAGE

Use Group Page to make an announcement through a group of voice ter-
minal speakers. Your system administrator designates up to seven groups
and can give you a list of the people in each group.
To page a group of voice terminals:
Touch Intercom-Voice.
Lift your handset.
Dial the appropriate Group Page code:
When you hear a beep, make your announcement through the hand-
set. (You hear a busy signal if all the voice terminals in the group are
busy.)
Hang up.

Programming Group Page Buttons

To program: T/P to P Touch the button Dial
Page code (listed in the procedure for Group Page)
T/P to center
You may program buttons for any of the seven groups that you page fre-
quently, so you only have to touch one button (Grp. Page 1, Grp. Page
2, and so on) instead of touching an Intercom button and then dialing a
code.
20
841 for group 1
842 group 2
843 group 3
844 group 4
group 5
845
group 6
846
group 7
847
*91
+ a Group