AT&T SPIRIT 308 System Planner

AT&T
®
SPIRIT
The information on this form will enable your AT&T Service Technician to install
your new SPIRIT system so that it works exactly as you want. It is important that you
provide the information prior to installation. In addition to installing the system, the
Service Technician will train you to use it, so you must have someone present during
installation.
What is the name and phone number of the person who will be present for training when the system is
1.
installed? Name
2. How many phone numbers (lines) do you have?
3. What sound do you hear when you dial your telephone? Touch tones
Depends on the line
4.
Do you dial a 1 before the area code when you make long distance calls? Yes
5. Do the people in your business have a need for private telephone conversations, or
one another's calls without permission?
6. Do you have any lines that should be used only by a specific person or group
manager's personal line that no one else is allowed to use. Yes
attached form.
7. Unless you specify otherwise, all lines are available when someone lifts the receiver
automatically selects one of the lines, the person hears a dial tone and makes the
button. Do you want any lines to be ineligible, so that people will have to press a
dial tone? Yes
8. The SPIRIT system lets you set your lines to ring immediately, in an abbreviated fashion, with a delay, or not
at all. For example, if you have a secretary who answers your calls, you may want the secretary's phone to ring
immediately, but yours to ring with a delay (that is, only if it has already rung for 12 seconds at the secretary's
phone). If you want anything other than immediate ring on any of your phones, complete Part C of the
attached form.
9. You can restrict some phones to internal calls only or local calls only, if you like. If you want to restrict any of
your phones, complete Part D of the attached form.
10. The location of your controller must meet the following requirements:
— It should be mounted at least two feet from the floor.
— It should be within five feet of the network interface jacks, that is, where your telephone lines come into
your establishment.
— It should be within five feet of 110V AC outlet not controlled by a switch.
— The area should be well ventilated and free of excess dust.
— The dimensions are:
Where will your controller be located?
Communications System Model 308/616

System Planner

Privacy
No
If yes, complete Part B of the attached form.
Controller 8½ " H x 16" W x 3"D
Expansion Unit 6"H x 16"W x 3"D
Customer Name
Address
Phone
DOSS Order No.
No privacy
No
Phone
Rotary clicks
No
should they be able to join
of people? For example, a
If yes, complete Part A of the
to make a call. The system
call without pressing a line
line button before getting a