Attendant Console For Small Systems - AT&T MERLIN 3070 Attendant's Manual

Use line buttons to place
and receive outside calls.
Touch Intercom-Voice and
Intercom-Ring to contact
others in your M E R L I N
system.
Slide the T/P switch to test or
program your console.
Use Conference, Drop,
Transfer, and Hold to han-
dle calls efficiently.
Use the volume control to
adjust the speaker and
ringer.
8
Attendant Console
for Small Systems*
*
Systems with 8 or fewer lines and 20 or fewer voice terminals.
Use Auto Intercom buttons
to transfer calls quickly and
contact and send messages
to people in your system.
Program custom features on
buttons not used for Auto
Intercom.
Check the green light by the
Message button to see if
y o u h a v e a m e s s a g e
waiting. Also, use Message
(in program mode) to set
your voice terminal for mak-
ing data calls and voice calls
simultaneously.
Touch Night Service to turn
Enhanced Night Service op-
tions on and off.
Touch Send Message t o
turn on the Message light at
another voice terminal.
Touch Speaker for on-hook
dialing, group listening, and
on-hook monitoring when
you are put on hold.
Touch Recall to disconnect
calls without hanging up
your handset.