DO NOT DISTURB
To program:
T/P to P • Touch the button • Dial
center
Use this feature to keep calls from ringing at your console:
• Touch Do Not Disturb.
The green light next to the button goes on.
Even though your voice terminal doesn't ring while Do Not Disturb is ac-
tive, a green light flashes next to a line button whenever a call comes in,
so you can answer a call if necessary.
While Do Not Disturb is active, outside calls maybe answered by another
attendant, transferred calls flash at your voice terminal and intercom
callers get a busy signal.
To
turn off the feature:
Touch Do Not Disturb.
The green light goes off.
MANUAL SIGNALING
To program: T/P to P Touch the button . Dial
intercom number
Use this feature to generate a beep at a coworker's voice terminal. Assign
a Manual Signaling button to each person you want to be able to signal.
To signal a coworker with a beep:
Without lifting your handset, touch a Manual Signaling button.
If you program Manual Signaling on a button with lights, the green light
next to the button goes on when your coworker is using his or her voice
terminal or has activated the Do Not Disturb feature.
NOTE: You cannot have an Auto Intercom button and a Manual Signal-
ing button for the same voice terminal.
T/P to
*71
6 + a 2-digit
*
T/P to center
49