Console With Attendant Intercom Selector - AT&T MERLIN 3070 Attendant's Manual

CONSOLE WITH ATTENDANT INTERCOM SELECTOR

To turn on a Message light, first make sure that the Message light is not
already turned on:
Touch Message Status.
The green light next to the button goes on.
Touch the appropriate Shift button.
The green light next to the button goes on.
When the green lights are on next to both the Message Status and the
Shift buttons, you know that the group of Auto Intercom buttons on your
console shows message status and not voice terminal status.
If the green light is on beside an Auto Intercom button, the person's
Message light is already on:
Touch Message Status again and save the message.
The green light goes off, telling you the green lights beside that group of Auto
Intercom buttons show voice terminal status, not message status.
If the green light is off, the person's Message light is not on. To turn it on:
Touch Send Message.
Touch the Auto Intercom button for the person's voice terminal.
The green light beside the button goes on, telling you the person's Message
light is on.
Touch Message Status.
The green light goes off, telling you the green lights beside that group of Auto
Intercom buttons show voice terminal status, not message status.
To turn off someone else's Message light from your console:
Touch Send Message.
Touch the Auto Intercom button for the person's voice terminal.
Keep in mind that when the green light next to Message Status is on, you
can see which voice terminals have Message lights on. When the green
light next to Message Status is off, you can determine which voice ter-
minals are busy.
31