Loudspeaker Page; Programming Loudspeaker Page Buttons - AT&T MERLIN 1030 Attendant's Manual

Loudspeaker Page

Your MERLIN system allows you to make announcements in up to three
separate zones through an optional loudspeaker paging system.
If your loudspeaker paging system is connected to the MERLIN system:
Touch Intercom-Voice or Intercom-Ring.
Lift your handset.
Dial one of the Loudspeaker Page codes listed below.
80 for all zones
81
82
83
Make your announcement by speaking through your handset.
If your loudspeaker paging system is connected to the PBX/Centrex:
Follow the instructions in the PBX/Centrex user's guide.

PROGRAMMING LOUDSPEAKER PAGE BUTTONS

To Program: T/P to P Touch the button
Loudspeaker Page code T/P to center
You may program a button for each of the paging zones (Page-All,
Page 1, and so on), so you touch only one button instead of touching an
Intercom button and then dialing a code. The page codes for program-
ming are listed above in the Loudspeaker Page procedure.
16
zone 1
zone 2
zone 3
Dial * 91 +
+ +
Intercom
Voice
page
code